Ques:- What is the least count of Vernier Caliper?
Right Answer:
The least count of a Vernier Caliper is typically 0.02 mm or 0.001 inch.
The least count of a Vernier Caliper is typically 0.02 mm or 0.001 inch.
Ques:- How can we check and make marking for bend preparation?
Asked In :-
Rieter India, CPB Contractors, volvo trucks, npcil, mercedes amg petronas formula one team, andritz hydro, fme, gep, adl,
Right Answer:
To check and make markings for bend preparation, follow these steps:
1. **Measure the Bend Angle**: Use a protractor or angle finder to determine the required bend angle.
2. **Mark the Bend Line**: Use a straight edge and a marker to draw a line where the bend will occur, ensuring it is aligned with the desired angle.
3. **Determine Bend Allowance**: Calculate the bend allowance based on the material thickness and bend radius.
4. **Mark the Start and End Points**: Measure from the bend line to mark the start and end points of the bend, considering the bend allowance.
5. **Check with Templates**: If available, use templates or jigs to verify the accuracy of your markings before bending.
Ensure all measurements are double-checked for accuracy.
To check and make markings for bend preparation, follow these steps:
1. **Measure the Bend Angle**: Use a protractor or angle finder to determine the required bend angle.
2. **Mark the Bend Line**: Use a straight edge and a marker to draw a line where the bend will occur, ensuring it is aligned with the desired angle.
3. **Determine Bend Allowance**: Calculate the bend allowance based on the material thickness and bend radius.
4. **Mark the Start and End Points**: Measure from the bend line to mark the start and end points of the bend, considering the bend allowance.
5. **Check with Templates**: If available, use templates or jigs to verify the accuracy of your markings before bending.
Ensure all measurements are double-checked for accuracy.
Ques:- What is instrumentation?
Asked In :-
Bobst India, South Western Railway, Windcare India, Visa Steel Ltd, kone, long island rail road, captronic systems pvt ltd, alstom,
Right Answer:
Instrumentation refers to the use of instruments and tools to measure, monitor, and control physical quantities such as temperature, pressure, flow, and level in various systems and processes.
Instrumentation refers to the use of instruments and tools to measure, monitor, and control physical quantities such as temperature, pressure, flow, and level in various systems and processes.
Ques:- What is a capacitor bank and why is it used_ – Quora
Asked In :-
Ques:- Mechanical Design Fundamentals
Asked In :-
Bharat Bijlee, Renault Nissan Technology & Business Centre, Intuitive (Intuitive Surgical), eaton, defence equipment & support (de&s), continental automotive group,
Right Answer:
Mechanical design fundamentals involve understanding the principles of mechanics, material properties, and manufacturing processes to create functional and efficient mechanical systems. Key concepts include stress and strain analysis, kinematics, dynamics, thermodynamics, and the use of CAD software for modeling and simulation.
Mechanical design fundamentals involve understanding the principles of mechanics, material properties, and manufacturing processes to create functional and efficient mechanical systems. Key concepts include stress and strain analysis, kinematics, dynamics, thermodynamics, and the use of CAD software for modeling and simulation.
Ques:- What is production?
Asked In :-
Daimler India Commercial Vehicles, mec,
Right Answer:
Production is the process of creating goods or services by combining various resources, such as raw materials, labor, and machinery, to meet consumer demand.
Production is the process of creating goods or services by combining various resources, such as raw materials, labor, and machinery, to meet consumer demand.
Ques:- What was your past experience
Asked In :-
adl,
Right Answer:
In my past experience, I worked as a Quality Engineer in the mechanical field, focusing on quality control processes, conducting inspections, and using MS Excel for data analysis and reporting to ensure product compliance with standards.
In my past experience, I worked as a Quality Engineer in the mechanical field, focusing on quality control processes, conducting inspections, and using MS Excel for data analysis and reporting to ensure product compliance with standards.
Ques:- What is your position in organition?
Asked In :-
Daimler India Commercial Vehicles, Atigo Electronics India, Saint-Gobain Glass India, Bharat Forge, Century Ply, Doha Petroleum Construction DOPET, FlowServe, Gharda Chemicals, Hindalco, Kirloskar,
Right Answer:
I am a manufacturing engineer.
I am a manufacturing engineer.
Ques:- What is meaning of Automobile?
Asked In :-
ontic,
Right Answer:
An automobile is a self-propelled vehicle designed for transporting passengers or goods on roads.
An automobile is a self-propelled vehicle designed for transporting passengers or goods on roads.
Ques:- What is the cost of stell production from Hot Metal
Asked In :-
JK Paper, Delta India Electronics, New India Electricals, qatargas, yarra trams, novoair, ethiopian electric power corp., captronic systems pvt ltd, keolis hyderabad mass rapid transit system pvt ltd,
Right Answer:
The cost of steel production from hot metal typically ranges from $300 to $600 per ton, depending on various factors such as raw material prices, energy costs, and production efficiency.
The cost of steel production from hot metal typically ranges from $300 to $600 per ton, depending on various factors such as raw material prices, energy costs, and production efficiency.
Ques:- What is rivited beam?
Asked In :-
Right Answer:
A riveted beam is a structural beam that is joined together using rivets, which are metal pins or bolts that hold the components in place, providing strength and stability to the structure.
A riveted beam is a structural beam that is joined together using rivets, which are metal pins or bolts that hold the components in place, providing strength and stability to the structure.
Ques:- What is silica?
Asked In :-
L&W Construction, smith & nephew,
Right Answer:
Silica is a chemical compound made of silicon and oxygen, commonly found in nature as quartz and in various forms of sand. It is used in construction materials like concrete and glass.
Silica is a chemical compound made of silicon and oxygen, commonly found in nature as quartz and in various forms of sand. It is used in construction materials like concrete and glass.
Ques:- How to reduce the costumer complaints?
Asked In :-
Right Answer:
To reduce customer complaints, focus on improving product quality, enhance customer service training, actively seek and address customer feedback, streamline processes, and ensure clear communication about product features and limitations.
To reduce customer complaints, focus on improving product quality, enhance customer service training, actively seek and address customer feedback, streamline processes, and ensure clear communication about product features and limitations.
Ques:- What is co2 m/c?
Asked In :-
Ques:- What is Vacuum Technology
Asked In :-
Azad Engineering, amey, tata power, zamil steel, aimil, rebar design & detail (p) ltd, nicmar, anova, eliot sinclair & partners, pqc,
Right Answer:
Vacuum technology is the science and engineering of creating and maintaining a vacuum, which is a space with significantly lower pressure than atmospheric pressure. It involves the use of vacuum pumps, chambers, and various techniques to remove air and other gases from a sealed environment for applications in industries like manufacturing, electronics, and research.
Vacuum technology is the science and engineering of creating and maintaining a vacuum, which is a space with significantly lower pressure than atmospheric pressure. It involves the use of vacuum pumps, chambers, and various techniques to remove air and other gases from a sealed environment for applications in industries like manufacturing, electronics, and research.
Ques:- How to design sub station?
Asked In :-
PitchBook, India Nippon Electricals, Knowlvers Consulting, Corporate Finance Institute (CFI), rtd, partnerre, south wales police, preqin, patra corporation, man energy solutions,
Right Answer:
To design a substation, follow these steps:
1. **Site Selection**: Choose an appropriate location considering accessibility, environmental impact, and proximity to load centers.
2. **Load Analysis**: Determine the electrical load requirements and future growth potential.
3. **Voltage Level**: Decide on the voltage levels for incoming and outgoing lines based on system requirements.
4. **Equipment Selection**: Select transformers, circuit breakers, switchgear, and protection devices based on load and voltage.
5. **Layout Design**: Create a layout that includes the arrangement of equipment, safety clearances, and access routes.
6. **Protection and Control**: Design protection schemes and control systems for safe operation and monitoring.
7. **Grounding System**: Design an effective grounding system to ensure safety and equipment protection.
8. **Compliance and Standards**: Ensure the design meets local regulations, safety standards, and utility requirements.
9. **Documentation**: Prepare detailed drawings, specifications, and operational manuals for
To design a substation, follow these steps:
1. **Site Selection**: Choose an appropriate location considering accessibility, environmental impact, and proximity to load centers.
2. **Load Analysis**: Determine the electrical load requirements and future growth potential.
3. **Voltage Level**: Decide on the voltage levels for incoming and outgoing lines based on system requirements.
4. **Equipment Selection**: Select transformers, circuit breakers, switchgear, and protection devices based on load and voltage.
5. **Layout Design**: Create a layout that includes the arrangement of equipment, safety clearances, and access routes.
6. **Protection and Control**: Design protection schemes and control systems for safe operation and monitoring.
7. **Grounding System**: Design an effective grounding system to ensure safety and equipment protection.
8. **Compliance and Standards**: Ensure the design meets local regulations, safety standards, and utility requirements.
9. **Documentation**: Prepare detailed drawings, specifications, and operational manuals for
Ques:- If 60 years retirement period but in case of politician , why not ……..?
Asked In :-
Dashen Brewery, PVC, Rieter India, Azad Engineering, iffco, united launch alliance (ula), ve commercial vehicles limited (a volvo group and eicher motors joint venture), fgf brands, brandix india apparel city pvt ltd.,
Right Answer:
Politicians often have different retirement ages or terms due to the nature of their roles, which can involve public service, election cycles, and varying responsibilities that differ from typical professions.
Politicians often have different retirement ages or terms due to the nature of their roles, which can involve public service, election cycles, and varying responsibilities that differ from typical professions.
