Safety Officer/ Engineer Interview Questions and Answers in 2025 (100+ Q&A)

Electrical Safety Officer/ Engineer

Ques:- A 6-pole, 50 Hz, 3-phase synchronous motor and on 8-pole, 50 Hz, 3-phase slip-ring induction motor are mechanically coupled and operate on the same 3-phase, 50 Hz supply. If they are left open-circuited, then the frequency of the voltage produced across any two slip rings would be

Asked In :- FlowServe, Salford Royal NHS Foundation Trust, Sime Darby, BC Ambulance Service, Ventia, Commercial Vehicle, imperial oil, southwest gas corporation, jsw energy ltd, south wales police,

Right Answer:
The frequency of the voltage produced across any two slip rings would be 50 Hz.

Electrical Safety Officer/ Engineer

Ques:- In transformers Which type of connection is preferred for harmonics to be minimum.primary : secondarystar without neutral:open deltastar with neutral :open deltastar without neutral: deltastar with neutral : deltaexplain why

Asked In :- Suzlon Energy limited, Severn Trent, Skanska UK, Rope Access Solutions, sandvik, rhi magnesita, almansoori specialized engineering, necsa, iko industries, evolution mining,

Right Answer:
Star connection with neutral is preferred for minimizing harmonics in transformers.

Electrical Safety Officer/ Engineer

Ques:- What is corona effect?

Asked In :- Eastman Chemical, Sharjah Electricity and Water Authority SEWA, WSP, Bharat Benz, Sea Blue Shipyard, SignOff Semiconductors, OSM Maritime Group, technip, necsa, bba aviation,

Right Answer:
The corona effect is the ionization of air surrounding a conductor when the electric field strength exceeds a certain threshold, leading to the partial discharge of electricity and the production of a visible glow, often accompanied by a hissing sound.

Electrical Safety Officer/ Engineer

Ques:- How to calculate overall heat transfer coefficient in insulated pipeline? Please give a answer with formula

Asked In :- xcel energy, oceaneering, air new zealand, bluescope steel, hatch mott macdonald, necsa, amreli steels limited, a.g. coombs,

Right Answer:
The overall heat transfer coefficient (U) for an insulated pipeline can be calculated using the formula:

[
frac{1}{U} = frac{1}{h_i} + frac{r_{ins}}{k_{ins}} lnleft(frac{r_{out}}{r_{ins}}right) + frac{1}{h_o}
]

Where:
- ( h_i ) = inner heat transfer coefficient
- ( h_o ) = outer heat transfer coefficient
- ( r_{ins} ) = inner radius of the insulation
- ( r_{out} ) = outer radius of the insulation
- ( k_{ins} ) = thermal conductivity of the insulation material

To find U, take the reciprocal of the total on the right side of the equation.

Electrical Safety Officer/ Engineer

Ques:- Give single line diagram of D.O.L and star -Delta starter ?

Asked In :- NTC Logistics India, Krishna Maruti Ltd, Tmeic International Corporation, saudi electricity company, dyson, sse plc, makati development corporation, mercedes amg petronas formula one team, ontario shores centre for mental health sciences, south african navy,

Right Answer:
**D.O.L Starter:**
```
[Power Supply] ---- [Contactor] ---- [Motor]
```

**Star-Delta Starter:**
```
[Power Supply] ---- [Contactor (Star)] ---- [Motor]
|
---- [Contactor (Delta)] ----
```

Electrical Safety Officer/ Engineer

Ques:- What is the difference in MCB, MCCB, RCCB, ELCB, & MPCB (motor protection circuit bracker)

Asked In :- Thorpe Park, Leonardo DRS, OSM Maritime Group, Urban Air Trampoline Park, queensland rail, cnooc, saskpower, almansoori specialized engineering, pakistan atomic energy commission, peoples gas,

Right Answer:
- **MCB (Miniature Circuit Breaker)**: Protects against overloads and short circuits in low voltage circuits.
- **MCCB (Molded Case Circuit Breaker)**: Protects against overloads and short circuits, suitable for higher current ratings than MCBs.
- **RCCB (Residual Current Circuit Breaker)**: Detects earth faults and protects against electric shock by disconnecting the circuit when it senses an imbalance in current.
- **ELCB (Earth Leakage Circuit Breaker)**: An older type of earth fault protection that disconnects the circuit when it detects leakage current; now largely replaced by RCCBs.
- **MPCB (Motor Protection Circuit Breaker)**: Specifically designed to protect motors from overloads, short circuits, and phase failures.

Personal Questions round Safety Officer/ Engineer

Ques:- How does one use DES securely ?

Asked In :- ETO, Wabtec, First TransPennine Express, anglogold ashanti, npcil, grn, sydney trains,

Right Answer:
To use DES securely, implement the following practices:

1. Use a strong key: Ensure the key is 56 bits long and kept secret.
2. Avoid using DES alone: Combine it with other security measures like key management and encryption protocols.
3. Use Triple DES (3DES): Encrypt data three times with DES to enhance security.
4. Regularly change keys: Update keys frequently to minimize the risk of compromise.
5. Use secure modes of operation: Implement modes like CBC (Cipher Block Chaining) to prevent patterns in the ciphertext.

Personal Questions round Safety Officer/ Engineer

Ques:- Please narrate your daily routine.

Asked In :- Duke Energy, Chessington World Of Adventures, newcrest mining, stagecoach bus, cleveland-cliffs inc,

Right Answer:
My daily routine as a Safety Officer/Engineer typically includes the following steps:

1. **Morning Briefing**: Review safety protocols and discuss any updates with the team.
2. **Site Inspection**: Conduct safety inspections of the worksite to identify hazards.
3. **Training Sessions**: Facilitate safety training for employees to ensure they understand safety practices.
4. **Incident Reporting**: Monitor and document any safety incidents or near misses.
5. **Compliance Checks**: Ensure that all safety regulations and standards are being followed.
6. **Meetings**: Attend meetings with management to discuss safety performance and improvements.
7. **Documentation**: Update safety records and reports as necessary.
8. **End-of-Day Review**: Evaluate the day's activities and plan for the next day.

Electrical Safety Officer/ Engineer

Ques:- What is the differance of acb and mcb and mccb

Asked In :- Sharjah Electricity and Water Authority SEWA, Tagros Chemicals India, Visa Steel Ltd, autoliv, saudi electricity company, qatargas, cnooc, forbes marshall, dtc, ewa,

Right Answer:
ACB (Air Circuit Breaker), MCB (Miniature Circuit Breaker), and MCCB (Molded Case Circuit Breaker) are all types of circuit breakers used for protection in electrical systems.

- **ACB**: Used for high voltage applications, can handle large currents, and is typically used in industrial settings.
- **MCB**: Protects against overload and short circuits for low voltage applications, automatically switches off when current exceeds a set limit.
- **MCCB**: Similar to MCB but can handle higher currents and provides adjustable settings for overload protection, suitable for medium voltage applications.

Personal Questions round Safety Officer/ Engineer

Ques:- Tell me a memmorable event in ur life.

Asked In :- xcel energy, clean harbors, ethiopian airlines, evolution mining, guy's and st thomas' nhs foundation trust, tropic ocean airways, philips optimum, siemens energy and automations,

Right Answer:
One memorable event in my life was when I successfully organized a safety training workshop at my previous job. It was rewarding to see my colleagues engage and learn about safety protocols, and it reinforced my passion for promoting a safe work environment.

Electrical Safety Officer/ Engineer

Ques:- Why in USA supply voltage parameters(230V,60Hz)are different,is there any advantage please brief.

Asked In :- Eastman Chemical, Thorpe Park, Lotus Cars, Hastings Deering (Australia), DEME, Mahagenco, New Jersey Transit, phillips 66, aurizon, b&r industrial automation,

Right Answer:
In the USA, the standard supply voltage is 120V at 60Hz, not 230V. The lower voltage (120V) is considered safer for residential use, reducing the risk of severe electric shock. The 60Hz frequency is a result of historical development and is suitable for the operation of electrical devices and motors. These parameters have advantages in terms of safety, compatibility with appliances, and efficiency for the electrical grid.

Electrical Safety Officer/ Engineer

Ques:- DIFFERANCE BETWEENfunction of ELCB?function of rccb?function of mccb?function of acb?function of mcb?

Asked In :- Wabtec, ve commercial vehicles limited (a volvo group and eicher motors joint venture), hyundai steel, oil spill response ltd, daikin ac, chill factore, alstom, ultramarine & pigments ltd, p.e.c., philips optimum,

Right Answer:
- **ELCB (Earth Leakage Circuit Breaker)**: Detects earth faults and disconnects the circuit to prevent electric shock and fire hazards.

- **RCCB (Residual Current Circuit Breaker)**: Monitors the balance of current between live and neutral wires; disconnects the circuit if an imbalance is detected, protecting against electric shock.

- **MCCB (Molded Case Circuit Breaker)**: Protects electrical circuits from overload and short circuits; can handle higher current ratings than MCBs.

- **ACB (Air Circuit Breaker)**: Protects large electrical circuits from overload and short circuits; operates in high current applications and can be reset manually.

- **MCB (Miniature Circuit Breaker)**: Automatically switches off electrical circuits during overload or short circuit conditions to prevent damage.

Electrical Safety Officer/ Engineer

Ques:- Why voltage coil in wattmeter called as pressure coil why the pressure term is used in wattmeter?

Asked In :- xcel energy, boskalis, southwest gas corporation, stagecoach bus, spic, africa world airlines limited, bus eireann, ceylon electricity board (ceb), alstom,

Right Answer:
The voltage coil in a wattmeter is called the pressure coil because it measures the voltage (or electrical pressure) across the load. The term "pressure" refers to the potential difference that drives the current through the circuit, similar to how pressure drives fluid in a pipe.

Personal Questions round Safety Officer/ Engineer

Ques:- WHICH PROCESS U FOLLOW IN COMPANY

Asked In :- Altorum Leren, Tagros Chemicals India, airservices australia, hatch mott macdonald, barratt homes, stagecoach bus, flyadeal,

Right Answer:
I follow a systematic process that includes identifying hazards, assessing risks, implementing safety measures, conducting training, and regularly reviewing and improving safety protocols.

Electrical Safety Officer/ Engineer

Ques:- Earth leakage relay basic knowledge principle

Asked In :- Naval Group, jindal steel & power ltd., ausgrid, samsung sdi, nova scotia power,

Right Answer:
An earth leakage relay detects current leakage to the ground by monitoring the difference between the live and neutral currents. If it senses an imbalance, indicating that some current is escaping to the earth, it triggers an alarm or disconnects the circuit to prevent electric shock or fire hazards.

Electrical Safety Officer/ Engineer

Ques:- What happens if generator is running leading power facotor?

Asked In :- Ventia, jindal steel & power ltd., virgin australia, american bureau of shipping, ausgrid, bgr energy systems, jsw cement, gb railfreight, sa airlink,

Right Answer:
If a generator is running at a leading power factor, it can cause overvoltage conditions and may lead to instability in the system. Additionally, it can result in excessive heating of the generator's windings and potential damage to the generator and connected equipment.

Electrical Safety Officer/ Engineer

Ques:- What is the SKIN effect in a condactor and how can bedecrease??????

Asked In :- Honda Motorcycle & Scooter India, Lotus Cars, Carraro India Pvt Ltd, commissioned corps of the u.s. public health service, hikvision, graham construction,

Right Answer:
The skin effect is the tendency of alternating current (AC) to flow mainly near the surface of a conductor, rather than uniformly throughout its cross-section. This effect increases with frequency, leading to higher resistance and reduced efficiency. To decrease the skin effect, you can use conductors with larger surface areas, such as stranded wire or litz wire, and operate at lower frequencies.

Electrical Safety Officer/ Engineer

Ques:- Why 24VDC power Supply is used as standard for all looppowered transmitters?

Asked In :- Eastman Chemical, KMCH, Megha Engineering and Infrastructure, bc hydro, rhi magnesita, guy's and st thomas' nhs foundation trust, metrolinx/go transit, a.g. coombs, my home constructions, teemage precast - india,

Right Answer:
24VDC power supply is used as a standard for loop-powered transmitters because it provides a good balance between sufficient voltage for operation and low power loss, while also being compatible with long cable runs and minimizing voltage drop.

Electrical Safety Officer/ Engineer

Ques:- What is the difference between voltage transformer and potential transformer?

Asked In :- Tolani Maritime, IndianOil Skytanking, Princess Yachts, Black & McDonald, Calaway Park, air new zealand, politecnico di milano, essential energy, royal jet, a.g. coombs,

Right Answer:
A voltage transformer (VT) is a general term for devices that step down voltage for measurement or protection, while a potential transformer (PT) specifically refers to a type of voltage transformer designed for measuring high voltages in power systems, providing a precise ratio for accurate voltage measurement.

Electrical Safety Officer/ Engineer

Ques:- What is the difference between thyristors and capacitors

Asked In :- Eastman Chemical, Wabtec, Chessington World Of Adventures, Commercial Vehicle, commissioned corps of the u.s. public health service, vikram solar, techture structures,

Right Answer:
Thyristors are semiconductor devices used to control electrical power, while capacitors are passive components that store and release electrical energy.

The Safety Officer/Engineer category on takluu.com is specially designed for professionals and aspirants preparing for interviews in the field of occupational health and safety. Safety officers and engineers play a vital role in ensuring workplace safety, preventing accidents, and enforcing compliance with safety regulations.

This section covers important topics such as risk assessment, hazard identification, safety audits, personal protective equipment (PPE), emergency response planning, and safety management systems (SMS). Candidates will also find questions related to legal standards, OSHA regulations, accident investigation, and safety training methods.

Interview questions often test practical knowledge and situational awareness, for example:

“How do you conduct a risk assessment in an industrial environment?”
“Explain the importance of PPE and its types.”
“What steps do you follow during an accident investigation?”

Our content simplifies complex safety regulations and procedures, providing clear explanations, real-life examples, and best practices. Whether you are a fresher or an experienced safety professional, this category helps you build confidence and excel in interviews.

At Takluu, we keep this category updated with the latest safety standards, tools, and industry trends, ensuring you remain informed and competitive in your career.

Questions in: Safety Officer/ Engineer

What makes Takluu valuable for interview preparation?

Get Our Mobile App

Programming

Reasoning

Network & Telecom

Management

What makes Takluu valuable for interview preparation?