Find Interview Questions for Swiftant it solutions

What is a Network Priner?
Network Priner is a printer which is connected to any other
computer instead of your our computer.
To configure a Network Priner we have to go to Settings >>
Printers and Faxes >> Add Priner.Follow on screen
instructions.
Select the appropriate printer on network (your computer
should be connected in the network and user must have
administrative privileges).
If aboue requisites meet the condition then you will be
able to successfully print the "Test Page" on network
printer.
NOTE: Some cases automatically drivers are being taken for
printer. But must keep the printer drivers CD handy.

In case of Wired printers
========================
1. Make sure that the computers network adapter is enabled.
2. Turn on the printer and connect the ethernet port of the
printer to the computer. Wait for 2-3 minutes.
3. Take out a network configuration page.
4. Note down the IP address of the printer. Try to open the
EWS page of the printer. Put the IP address of the printer
in the IE address bar. An EWS page should open, if opening
then the printer is communicating with the computer. You
can modify various network setting from this page.
5. Now, go to Printers and Faxes or devices and Printers in
case of Windows 7
6. Run Add printer wizard, select the network printer, the
wizard will search the printer and follow the onscreen
instructions. In case the printer driver is already
installed via USB, then right click on the printer's icon
and choose properties, Click on Ports tab>Select Add
port>select TCP/IP port>select New port>put the IP address
of the printer and click on Next and OK. Printer is
confirgured to the network.
In case of Wireless Printer
==========================
1. Make sure that the computer's wireless network adapter
is enabled.
2. Reset the printer network defaults
3. Turn on the wireless radio of the printer.
4. Take out a network configuration page.
5. Note down the IP address of the printer. Try to open the
EWS page of the printer. Put the IP address of the printer
in the IE address bar. An EWS page should open, if opening
then the printer is communicating with the computer. You
can modify various network setting from this page.
6. Now, go to Printers and Faxes or devices and Printers in
case of Windows 7
7. Run Add printer wizard, select the network printer, the
wizard will search the printer and follow the onscreen
instructions. In case the printer driver is already
installed via USB, then right click on the printer's icon
and choose properties, Click on Ports tab>Select Add
port>select TCP/IP port>select New port>put the IP address
of the printer and click on Next and OK. Printer is
confirgured to the network.

Router:
works on third layer i.e Network Layer.
Does path selection, routing etc.
Creates multiple collision domail and multiple broadcast
domain.
Switch:
works on second layer i.e datalynik Layer.
Does framinng.Error Detection etc.
Each port on the switch has a seperate collision domain.
It has single broadcast doamin and multiple collision
domain.
Hub:
It works on physical layer.
It simply forwards the data to each port of it.
Its a non intelligent device.
Has Single collision Domain and single broadcast domain.

Hub
A common connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports. When a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.
Switch
In networks, a device that filters and forwards packets between LAN segments. Switches operate at the data link layer (layer 2) and sometimes the network layer (layer 3) of the OSI Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs.
Router
A device that forwards data packets along networks. A router is connected to at least two networks, commonly two LANs or WANs or a LAN and its ISP.s network. Routers are located at gateways, the places where two or more networks connect. Routers use headers and forwarding tables to determine the best path for forwarding the packets, and they use protocols such as ICMP to communicate with each other and configure the best route between any two hosts.

Network Topologies
Star , Bus, ring , tree

topology is defined as a arrangement of a computer in a
network.topology are classified into 5 types.
1.mesh topplogy
2.star topology
3.tree topology
4.bus topology
5.ring topology

a)